Xerox 5222 System Administration Manual page 38

3 Maintenance
message stating to empty the container appears again, and this can cause a
breakdown of the machine.
NOTE: Make sure you empty the hole punch waste container when the power is on. If
you empty the container when the power is off, the machine will not recognize that the
container has been emptied.
1.
Make sure that the machine is not
operating, and open the front
transport cover of the finisher.
2.
Pull out the hole punch waste
container.
3.
Empty the container.
4.
Insert the empty hole punch waste
container all the way into the
finisher.
5.
Close the front transport cover of the finisher.
NOTE: If the center front transport cover of the finisher is not completely closed, a
message will appear and the machine will not operate.
38