Storing And Handling Paper; Supported Paper Sizes And Types; Supported Paper Sizes - Xerox 5222 System Administration Manual

Storing and Handling Paper

Always use high quality, xerographic grade paper in the machine. Damaged, curled, or
damp paper can cause jams and image quality problems. Follow these simple rules to
store paper.
• Store paper in dry conditions, away from extreme heat or cold, such as radiators or
open windows.
• Store paper flat on a shelf or pallet above floor level.
• Leave the paper wrapped and boxed until ready to be used.
• Re-wrap partly used packages of paper.
NOTE: Do not store paper in the paper trays.

Supported Paper Sizes and Types

This section lists the sizes and types of paper that can be used with the machine.

Supported Paper Sizes

The following table lists the paper sizes supported by each paper tray, output tray, and
the duplex module.
NOTE: For the capacity of each tray, refer to
Standard Sizes
NOTE: The standard sizes of paper that can be detected vary depending on the paper
size table specified by the System Administrator. For information on setting the paper
size table, refer to
Paper Trays - Standard Sizes
Paper Size
A6
A5
A4
A3
B6
B5
B4
5.5 × 8.5"
Paper Size Settings in the Setups chapter on page 78.
Tray 1, 2
/
Dimensions LEF/
Tray 3, 4
(mm) SEF
(Two Tray
Module)
105.0 148.0 LEF
148.0 210.0 SEF
LEF
210.0 297.0 SEF O
LEF O
297.0 420.0 SEF O
128.5 182.0 SEF
182.0 257.0 SEF O
LEF
257.0 364.0 SEF O
139.7 215.9 SEF O
LEF
Storing and Handling Paper
Appendix
on page 421.
Tray 3, 4
Tray 6
(High Tray 5
(High
Capacity (Bypass
Capacity
Tandem Tray)
Feeder)
Tray)
O
O
O
O
O O
O
O
O
O
O
O
O
Envelope
Tray
O
23