Xerox 5222 System Administration Manual page 71

Paper Tray Attributes During Loading
Specifies whether to display the paper tray attributes on the control panel when the tray
is opened to load paper. This setting does not apply to Tray 5 (Bypass).
Paper Tray Priority
Specifies the paper tray priority for Auto Tray Switching. Tray 5 (Bypass) is not
available. For more information on Auto Tray Switching, refer to
on page 22
.
Paper Type Priority
Specifies the paper type priority for Auto Tray Switching. This setting overrides the
Paper Tray Priority. If the priority of paper types is set to the same value, then Auto Tray
Switching will select a tray based on the Paper Tray Priority. Selecting [Auto Paper Off]
prevents the paper type from being used by Auto Tray Switching. For more information
on Auto Tray Switching, refer to
Tray 5 (Bypass) - Paper Size Defaults
Specifies the default paper sizes to be displayed on the [Tray 5 (Bypass)] screen of the
[Paper Supply] feature. If you frequently use non-standard size paper for copying,
assigning the paper size to a button will be helpful for you.
• A/B Series Size
Displays standard paper sizes of the A/B series.
• Inch Size
Displays standard paper sizes of the Inch series.
• Others
Displays other paper sizes.
• Custom Size
Allows you to enter a paper size. Specify the paper width (X) and the paper length
(Y).
Auto Tray Switching Control
Specifies whether to enable Auto Tray Switching. For more information on Auto Tray
Auto Tray Switching on page 22
Switching, refer to
• Auto Tray Switching
Specifies the conditions to enable the Auto Tray Switching feature.
• Targeted Paper Type (Copy Jobs)
Targets some paper types according to the settings in [Paper Tray Priority] or only
one paper type.
• Targeted Paper Color (Copy Jobs)
Targets all paper colors or only one paper color.
NOTE: In any of the following cases, Auto Tray Switching is not available.
– If Tray 5 (Bypass) is selected.
– If the specified tray holds paper other than Plain paper, Recycled paper, Side 2
paper, and Custom paper.
– If the specified tray holds paper set under [Auto Paper Off] in the [Paper Type
Priority] setting.
Auto Tray Switching on page 22
.
System Settings
Auto Tray Switching
.
71