Components Of The Setting Screen Of The Communication Command Macro Tool And How To Configure Settings - Omron SYSMAC FH Series User Manual

Components of the Setting Screen of the Communication Command Macro Tool and How to Configure Settings

The components of the setting screen of the communication command macro tool are indicated below.
Setting Procedure for Communication Command Macro
You can create and edit communication command macros.
You can create up to 256 (from 0 to 255) communication command macros.
6
5
4
3
2
1
0
11
Descriptions of Dialog Box Objects
No. Name
0 Copy
1 Paste
2 Clear
3 Initialization
4 Command list
5 Edit
6 Enable/Disable
7 Command name Display and edit command name for selected command.
8 Function name
9 Comment
10 Busy On
11 Export
12 Import
13 OK
14 Cancel
192
Basic Knowledge For Macro Customize Functions
12 13 14
Copy the selected command in the command list.
The selected command is overwritten by the copied information.
Paste targets are "comments" and "processing details." If nothing is copied, this is disabled.
The information of selected command, such as "Command name" "Function Name"
"Comment" and "Program" is initialized.
The information of all of the commands, such as "Command name" "Function Name"
"Comment" and "Program" is initialized.
Display the list of the commands.
Launch the Macro program editor for selected command.
Set/display whether custom command is enabled.
If defined but not checked, it is not executed.
Display and edit function name for selected command.
Display and edit comment for selected command.
Set/display whether to change to measurement stop state (MeasureStop) before executing
command. If checked, BUSY is turned ON while command is executing, and then after
execution of command has finished, measurement stop state is released (MeasureStart).
Afterwards, a MeasureInit event is raised.
Export the macro program to file.
Import the macro program from file.
The existing data will be overwritten.
Save change and return to Main window.
Return to Main window without saving.
Description
WWW.NNC.IR
7
8
9
10
Vision System FH/FZ5 Series
User's Manual (Z340)