Saving And Loading Programs - Omron SYSMAC FH Series User Manual

Measurement Results For Which Output is Possible (Unit Macro)
To output the measurement result of the unit macro, assign the value of the unit macro calculation result to
data output or the calculation processing item and output externally.
External Reference Table (Unit Macro)
The external reference table of the unit macro does not contain any data that can be referenced.

Saving and Loading Programs

Programs created using macro customize functions can be saved and loaded as scene data in the "Unit Macro"
processing item and the "Unit Calculation Macro" processing item, and the settings can be saved in the sensor
controller with "Data save". With the exception of some functions, standalone programs can be saved and
loaded. A standalone program can be handled as a file, and thus programs can be managed and analyzed on a
computer using a text editor.
Saving and Loading Programs in the Unit Calculation Macro
In the "Unit Calculation Macro" processing item, programs can be saved and loaded to the scene data as a
processing unit, and in the properties screen of the processing item, programs can be saved as standalone
programs. A program saved in the "Unit Calculation Macro" processing item can be loaded using the
properties screen of the "Unit Macro" processing item.
Follow the procedure below to output the set calculation process to a file.
1
Click [Export] in the file area.
2
Specify the file save location and the file name, and click [OK].
IMPORTANT
• A standalone program cannot be loaded in the "Unit Calculation Macro" processing item. If loading is necessary, load
scene data.
• The programs saved in the "Unit Calculation Macro" processing item include created programs and programs
automatically generated by the processing item. Do not change an automatically generated program. If changed, the
program may not load normally.
Saving and Loading Programs in the Scene Control Macro
In the scene control macro tool, a program can be saved when "Data save" is executed.
Vision System FH/FZ5 Series
User's Manual (Z340)
Basic Knowledge For Macro Customize
WWW.NNC.IR
5
203
Functions