Omron SYSMAC FH Series User Manual page 102

Parameter
Scattering R's data No.
Scattering G's data No.
Scattering B's data No.
[Data reference] button
• Binary Dialog Box Setting Region
Parameter
Binary upper's data No.
Binary lower's data No.
Binary reverse's data
No.
[Data reference] button
100
Custom Dialogs
Set value [Factory default]
−1 to 999999999
[−1]
−1 to 999999999
[−1]
−1 to 999999999
[−1]
---
Set value [Factory default]
−1 to 999999999
[−1]
−1 to 999999999
[−1]
−1 to 999999999
[−1]
---
WWW.NNC.IR
Description
Specifies the R's data number for the difference in the unit to
use for color extraction.
Specifies the G's data number for the difference in the unit to
use for color extraction.
Specifies the B's data number for the difference in the unit to
use for color extraction.
You can select the data number directly to enter it, or you
can enter it with the [Data reference] button.
Click the [Data reference] button to select the target data in
the [Data reference] dialog box.
Description
Specifies the upper data number for the unit to use for binary
filtering.
Specifies the lower data number for the unit to use for binary
filtering.
Specifies the reverse data number for the unit to use for
binary filtering.
You can select the data number directly to enter it, or you
can enter it with the [Data reference] button.
Click the [Data reference] button to select the target data in
the [Data reference] dialog box.
Vision System FH/FZ5 Series
User's Manual (Z340)