Saving Image Files To A Ram Disk Or External Memory Device - Omron SYSMAC FH Series User Manual

Saving Image Files to a RAM Disk or External Memory Device

This section describes how to save logged images and image files that are saved in the Controller to a RAM disk
or external memory device in the Controller. The storage format (bitmap or Jpeg) can be specified when the
images are saved.
IMPORTANT
During saving, do not restart, turn OFF the power supply, or remove the external memory device. The data may be
corrupted.
Saving Logging Images
1
When saving data to external memory, insert an external memory device into the Sensor
Controller.
2
In the Main Window, select [Image file save] from the [Tool] menu.
The [Image file save] dialog box is displayed.
3
Click [Logging image] and select the
logged image to save.
Parameter
Data to be saved
4
Specify the destination folder name and
file type.
Parameter
Folder name
Format
Quality
5
Click [OK].
The image is logged in the selected destination. If a file with the same name already exists in the
destination folder, the newly saved file overwrites the old one.
146

Saving Image Files to a RAM Disk or External Memory Device

Set value [Factory default]
[All logging image]
Select image
Set value [Factory default]
---
• [Bitmap]
• Jpeg
0 to 100
[100]
WWW.NNC.IR
Description
All logged images are saved.
The selected logged images are saved.
Click [▼] to select the image to save.
When [Latest measurement] - [logging image] is selected,
the save file name will be LoggingImage000.ifz.
Description
Specify the destination folder name.
Select the image format in which to save the image.
Specify the quality of the Jpeg image to save
Vision System FH/FZ5 Series
User's Manual (Z340)