Using The Operation Log - Omron SYSMAC FH Series User Manual

Using the Operation Log

The operation log automatically saves the contents of Controller operations and setting changes in a unique file
delimited with semicolons (;). Setting content changes are recorded as a time series, which makes change
management possible.
Setting the Operation Log
Set the destination to save the operation log. Also set whether to start recording the operation log during startup.
Sample output of an operation log: This log records the date, time, user name, and the operation that was
performed.
2012/09/10 13:08:41;Administrator;SetSystemData,"OperationLog","enabled","1";0
2012/09/10 13:08:41;Administrator;MeasureStart;0
2012/09/10 13:08:41;Administrator;GetSceneGroupNo;0
· · ·
1
In the Main Window, select [System settings] − [Other] − [Operation log setting] from the [Tool]
menu.
The [Operation log settings] dialog box is displayed.
2
Set the parameters for the operation log.
Parameter
Starting at startup
Folder name
3
Click [Apply].
Vision System FH/FZ5 Series
User's Manual (Z340)
Select this check box to record the operation log from startup The setting will be
reflected from the next time that the system starts up.
Specify the destination folder name. The operation log file name is the date and time at
which the operation log was started plus the .log extension. Example: 2012-09-29_12-
39-04.log
• In Multi-line Random Trigger Mode, set a save destination for each line.
The file name is the date and time at which the operation log was started + the line
number + the "log" extension.
Example: 2012-09-29_12-39-04_Line0.log
This setting only takes effect after you save the data and restart the system.
• In non-stop adjustment mode, the non-stop adjustment log is saved with the file name
(date and time at which the operation log was started)_Nonstop.log.
WWW.NNC.IR
Description
Useful Functions for Operation
3
125