Omron SYSMAC FH Series User Manual page 586

ItemTitle$
Gets the processing item title.
Format
ItemTitle$(<itemNo>)
Parameter
Parameter
Data type
name
<itemNo> Integer type
Return value
Returns the title as a character string.
Description
Gets the title of the processing item specified in the <itemNo> parameter.
The title can be gotten in a language based on the language setting.
If an incorrect data type is specified for a parameter, a "Type mismatch" error will occur.
Even if a non-existent number, numerical value, or combination of data types or values is specified for the
parameter, an error will not occur.
If a value is assigned to the return value variable or the variable is not used in an expression, a "Syntax error"
error will occur.
If the format is written incorrectly, such as writing the macro function name incorrectly, omitting a comma, or
omitting a half-width space, a "Syntax error" error will occur.
Usage Cautions
• None.
Example
Gets the number of processing item types, and gets the title of the processing item of each processing item
number by repeated processing.
Rem Get the number of the available processing items.
INUM& = ItemCount
Rem Repeat the process up to the number of the processing items.
For I&=0 To INUM&-1
Rem Get the title of the processing item
TITLE$ = ItemTitle$(I&)
Next
Useable Modules
Scene Control Macro / Communication Command Macro
Supported Versions
Version 3.50 or later
Related Items
ItemCount (Reference:
ItemIdent$ (Reference:
584
Macro Reference
Processing item number to get the title name
Details (p.579))
Details (p.580))
WWW.NNC.IR
Description
ItemInfo (Reference: Details (p.582))
Vision System FH/FZ5 Series
User's Manual (Z340)