Omron SYSMAC FH Series User Manual page 109

Radio Button Setting Region
Parameter
Target unit No.
Target data No.
[Data reference] button
Set value
Check Box Setting Region
Parameter
Target unit No.
Target data No.
[Data reference] button
Combo Box Setting Region
Parameter
Target unit No.
Target data No.
[Data reference] button
Vision System FH/FZ5 Series
User's Manual (Z340)
Set value [Factory default]
0 to Number of units in the
display target scene - 1
[0]
0 to 9999999
[0]
---
0 to 9999999
[0]
Set value [Factory default]
0 to Number of units in the
display target scene - 1
[0]
0 to 9999999
[0]
---
Set value [Factory default]
0 to Number of units in the
display target scene - 1
[0]
0 to 9999999
[0]
---
WWW.NNC.IR
Description
Specify the unit to be the target for the radio button setting.
The units that are registered for the scene that is the target
of the normal dialog box will appear in the combo box.
Select the processing unit to set.
Specify the data to be the target for the radio button setting.
Enter the data number for the unit that is specified by the
target unit number.
You can select the data number directly to enter it, or you
can enter it with the [Data reference] button.
Click the [Data reference] button to select the target data in
the [Data reference] dialog box.
Enter the numeric value to set in the target data when the
radio button is selected.
The numeric value that is set here is the set value for that
selected radio button that is applied to the data for the target
data number when the operator changes the radio button
selection on the actual custom dialog box.
Description
Specify the unit to be the target for the check box setting.
The units that are registered for the scene that is the target
of the normal dialog box will appear in the combo box.
Select the processing unit to set.
Specify the data to be the target for the check box setting.
Enter the data number for the unit that is specified by the
target unit number.
You can select the data number directly to enter it, or you
can enter it with the [Data reference] button.
Click the [Data reference] button to select the target data in
the [Data reference] dialog box.
Description
Specify the unit to be the target for the combo box setting.
The units that are registered for the scene that is the target
of the normal dialog box will appear in the combo box.
Select the processing unit to set.
Specify the data to be the target for the combo box setting.
Enter the data number for the unit that is specified by the
target unit number.
You can select the data number directly to enter it, or you
can enter it with the [Data reference] button.
Click the [Data reference] button to select the target data in
the [Data reference] dialog box.
3
107
Custom Dialogs