Fh/Fz5 Manual Configuration; Conventions Used In This Manual - Omron SYSMAC FH Series User Manual

FH/FZ5 Manual Configuration

The following table gives the manual configuration of the FH/FZ5.
Cat. No.
FH Image Processing System
2285550-0
Instruction Manual
9524422-4
(FZ5-6 /11 ) FH5 Image Processing
System Instruction Manual
9910002-2
(FZ5-L3 )
Z340 Vision System FH/FZ5 Series
(This manual) User's Manual
Vision System FH/FZ5 Series
Z341 Processing Item Function
Reference Manual
Vision System FH/FZ5 Series
Z342 User's Manual for
Communications Settings
Vision System FH Series
Z343 Operation Manual for Sysmac
Studio

Conventions Used in This Manual

Symbols
The symbols used in this manual have the following meanings.
Indicates relevant operational precautions that must be followed.
IMPORTANT
Indicates operation-related suggestions from OMRON.
Note
Use of Quotation Marks and Brackets
In this manual, menus and other items are indicated as follows.
[ ] Menu Indicates the menu names or processing items shown in the menu bar.
Item name Indicates the item names displayed on the screen.
" "
Vision System FH/FZ5 Series
User's Manual (Z340)
Manual name
Provides FH-series specifications,
dimensions, part names, I/O
information, mounting information,
and wiring information.
Provides FH5-series specifications,
dimensions, part names, I/O
information, installation information,
and wiring information.
Describes the software functions,
settings, and operations for using
FH/FH5-series Vision Sensors.
Describes the functions, settings,
and operations of the processing
items that you can use with the FH/
FH5-series Vision Sensors.
Describes the functions, settings,
and communications methods for
communicating between FH/FH5-
series Vision Sensors and external
devices (e.g., a PLC).
The following communications
protocols are included.
Parallel, PLC Link, EtherNet/IP,
EtherCAT, and Non-procedure
Describes the operating procedures
for setting up and operating FH-series
Vision Sensors from the Sysmac
Studio FH Tools.
WWW.NNC.IR
Contents
Checking I/O and other
specifications and performing
installation and wiring
Any application other than the
above applications and
communications
Checking information on
processing items when designing
or manipulating measurement
flows
Use this manual together with the
User's Manual.
Checking information on
communications functions
Communicating with an NJ-series
Controller via EtherCAT
communications
Main applications
1