List Of I/O Modules - Omron SYSMAC FH Series User Manual

List of I/O Modules

I/O module settings required for communication with external devices are indicated below.
Identification name
EtherNetIP
ParallelIo
SerialNormal
SerialNormal2 (Fxxx series method)
SerialPlcLinkM
SerialPlcLink
TcpClient
TcpNormal
UdpNormal
UdpNormal2 (Fxxx series method)
UdpPlcLinkM
UdpPlcLinkY
UdpPlcLink
EtherNetIP
EtherNet/IP Interface communication
IoModule identification name
EtherNetIP
Overview
This is a module is for sending and receiving commands and data by Ethernet/IP protocol.
System data
Identification
handshake
cycleTime
outputTime
timeout
Supported functions
IoInitialize
GetPort
PutPort
Vision System FH/FZ5 Series
User's Manual (Z340)
IO module name
EtherNet/IP Interface communication
Parallel Interface communication
Serial Interface Normal communication
Serial Interface PLC Link (MELSEC QnU/Q/QnAS)
communication
Serial Interface PLC Link (SYSMAC CS/CJ/CP/
One) communication
TCP Client Normal communication
TCP Normal communication
UDP Normal communication
PLC Link (MELSEC QnU/Q/QnAS) communication Reference: Details (p.356)
PLC Link (JEPMC MP) communication
PLC Link (SYSMAC CS/CJ/CP/One)
communication
Meaning
Output control
0: OFF
1: Handshaking
Output period [ms]
Output time [ms]
Timeout [s]
OK
OK Reference:
OK Reference:
WWW.NNC.IR
References
Reference: Details (p.341)
Reference: Details (p.343)
Reference: Details (p.344)
Reference: Details (p.346)
Reference: Details (p.348)
Reference: Details (p.351)
Reference: Details (p.352)
Reference: Details (p.354)
Reference: Details (p.358)
Reference: Details (p.361)
0
100
50
100
---
GetPort (p.542)
PutPort (p.645)
Initial value
8
341
Macro Reference