Setting The Screen Saver - Omron T20 User Manual

Chapter 5: Maintenance
Option
Pendant Msgs
The following table describes the soft keys shown on the System Maintenance screen.
Soft Key
Info
Errors
Update

5.2 Setting the Screen Saver

You can specify the length of time without activity before the screen saver is activated.
To set the screen saver idle time:
1. From the Home 1 screen, press Next > to display the Home 2 screen.
2. Press Maint. The System Maintenance screen opens.
3. If necessary, press the up/down arrow buttons to select the Screen Saver field. Press OK.
4. Press the up/down arrow buttons to select the length of time before the screen saver is
activated.
The options available are:
Thirty Seconds
l
One Minutes
l
Two Minutes
l
Five Minutes
l
Ten Minutes
l
Twenty Minutes
l
One Hour
l
5. Press OK to accept the change. Press Cancel to revert to the previous setting.
Enables/disables whether errors are displayed. If disabled,
errors are not reported to the pendant.
Accesses a screen that displays the system information from
the controller. For details, see Displaying System Information
on page 42.
Accesses the error log. For details, see Displaying Recent
Errors on page 43.
Updates the pendant firmware. For details, see Displaying
System Information on page 42.
T20 Pendant User's Guide, 10433-000 Rev. E
Page 40 of 50
Description
Description