Extended Control/Status Byte; Table 18: Control Byte C1; Table 19: Status Byte S1 - WAGO 753-1630 Manual

753-1630 SMI Master Module 230 V AC
Pos: 79 /Serie 753 (WAGO-I/O-SYSTEM)/Prozessabbild Klemmenbus/FT&K/Prozessabbild 753-1630, -1631/Prozessabbild 753-1630, -1631 - Erweitertes Control-/Statusbyte @ 28\mod_1478705544660_21.docx @ 386890 @ 2 @ 1
5.2

Extended Control/Status Byte

The SMI master module also has an extended control/status byte.

Table 18: Control byte C1

Bit 7
-
-
Controller
failure
monitoring
Energy saving
mode
Controller
locking

Table 19: Status Byte S1

Bit 7
DI
-
Forced position Forced position:
Energy saving
mode
Controller
locking
DI
Pos: 80 /Dokumentation allgemein/Gliederungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.docx @ 21810 @ @ 1
Control byte C1
Bit 6 Bit 5 Bit 4
- - -
Not used
Heartbeat of the PLC for controller failure monitoring
Energy saving mode:
0 – Deactivate energy saving function
1 – Activate energy saving function
Controller locking:
0 – Deactivate
1 – Activate
Bit 6 Bit 5 Bit 4
- - -
Not used
0 – Inactive
1 – Active
Energy saving mode:
0 – Inactive
1 – Active
Controller locking:
0 – Inactive
1 – Active
Status of the digital input:
0 – Low
1 – High
Bit 3 Bit 2
- Controller
locking
Status Byte S1
Bit 3 Bit 2
- Controller
locking
Version 1.2.0 FW/HW Version 02/01
Process Image 41
Bit 1 Bit 0
Energy Controller
saving mode failure
monitoring
Bit 1 Bit 0
Energy Forced
saving mode position
Manual