Communication; Table 11: Technical Data - Communication; Table 12: Technical Data - Field Wiring - WAGO 753-1630 Manual

Smi master module 230 v ac

Hide thumbs

Table of Contents

753-1630 SMI Master Module 230 V AC

3.5.3

Communication

Table 11: Technical Data – Communication

Number of SMI channels

Number of controllable SMI drives per

SMI channel

SMI interface

Number of digital inputs

Voltage

max.

Voltage

min.

Number of digital outputs

Rated current at the digital output

SMI cable type

SMI cable length

Data width

Startup and configuration

Pos: 53 /Serie 750 (WAGO-I/O-SYSTEM)/Wichtige Erläuterungen/Sicherheits- und sonstige Hinweise/Hinweis/Hinweis: Für Systemversorgung externe Pufferung vornehmen! @ 24\mod_1449582212007_21.docx @ 196902 @ @ 1

Buffer for system power supply!

The system power supply must be buffered to bridge power outages. As the

power demand depends on the respective node configuration, buffering is not

implemented internally.

To achieve power outages of 1 ms to 10 ms according to IEC61131-2, determine

the buffering appropriate for your node configuration and structure it as an

external circuit.

Pos: 54 /Serie 750 (WAGO-I/O-SYSTEM)/Gerätebeschreibung/Technische Daten/Anschlusstechnik/Technische Daten Verdrahtungsebene CC - 0,08 bis 2,5mm2 @ 17\mod_1380121238809_21.docx @ 132780 @ @ 1

Table 12: Technical Data – Field Wiring

Wire connection

Cross section

Stripped lengths

Pos: 55 /Serie 750 (WAGO-I/O-SYSTEM)/Gerätebeschreibung/Technische Daten/Klimatische Umgebungsbedingungen/Technische Daten Klimat. Umgebungsbed. ohne erw. Temp. 0...55°C/-20 ...+85°C - SMI - 0753-1630/-1631 @ 28\mod_1479222315698_21.docx @ 387258 @ 3 @ 1

at the digital input

max.

Device Description

1 to 16

SMI master interface acc. to the "SMI

Data Format and Framework Protocol"

specification Rev. 2.3.2 and "HMI

Hardware Specification" Rev. 2.0

1 × IEC 61131-2, Type 1

31.2 VDC

At status 1: 9.6 VDC

At status 0: 0 VDC