Plug Removal; Figure 18: Pulling The Pull Tab; Figure 19: Removing The Plug Without Tools; Figure 20: Removing The Plug Using A Screwdriver - WAGO 753-1630 Manual

54 Mounting
Pos: 90.15 /Serie 753 (WAGO-I/O-SYSTEM)/Montieren/Lösen des Steckers vom I/O-Modul Serie 753 @ 4\mod_1240393485109_21.docx @ 31214 @ 3 @ 1
6.3.2

Plug Removal

1. Remove the plug from the I/O module by pulling the orange pull tab on the
plug toward the top of the I/O module.

Figure 18: Pulling the Pull Tab

The plug detaches from the I/O module.

Figure 19: Removing the Plug Without Tools

2. Alternatively, you can also use a standard screwdriver at the position
shown (in the figure below) to remove the plug.

Figure 20: Removing the Plug Using a Screwdriver

Pos: 91 /Dokumentation allgemein/Gliederungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.docx @ 21810 @ @ 1
Manual
Version 1.2.0 FW/HW Version 02/01
753-1630 SMI Master Module 230 V AC