Removing The I/O Module; Figure 10: Removing The I/O Module (Example) - WAGO 753-1630 Manual

50 Mounting
Pos: 90.10 /Serie 753 (WAGO-I/O-SYSTEM)/Montieren/I/O-Modul 753 entfernen @ 20\mod_1412665995998_21.docx @ 165319 @ 3 @ 1
6.2.2

Removing the I/O Module

Note
Remove pluggable wiring!
Before removing a 753 Series I/O Module from the node, you must first
remove the plug (pluggable wiring) from the I/O module (see section "Plug
Removal")!
1. Remove the I/O module from the node by pulling the tab.

Figure 10: Removing the I/O Module (Example)

Electrical connections for data or power jumper contacts are disconnected when
removing the I/O module.
Pos: 90.11 /Dokumentation allgemein/Gliederungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.docx @ 21810 @ @ 1
Manual
Version 1.2.0 FW/HW Version 02/01
753-1630 SMI Master Module 230 V AC