Sos-3D Sync Out; Spd-Dynamic Black Speed - Christie DWU1612-HS Technical Reference

SOS–3D Sync Out
Transmits a 3D sync signal by the 3D sync output connector to the emitter or another downstream
projector for 3D blending purposes.
Commands
Command Description
SOS <0 | 1> Configures the 3D Sync OUT port.
Examples
Configure the 3D Sync OUT port to fed directly to a 3D emitter:
(SOS 0)
Configure the 3D Sync OUT port to fed to a downstream projector:
(SOS 1)
SPD–Dynamic Black Speed
Adjusts the speed of the light source correction.
Commands
Command Description
SPD <value> Adjusts the speed of the light source
correction. A lower value makes the
correction slower and less aggressive, while
a higher value results in a faster correction.
Examples
Slowly correct the light source:
(SPD 1)
Correct the light source more aggressively:
(SPD 14)
DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands
020-103352-01 Rev. 1 (03-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Serial API commands
Values
0 = Configures the 3D Sync OUT port to be fed
directly to a 3D emitter (Default)
1 = Configures the 3D Sync OUT port to be fed to
another downstream projector
Values
1 to 15
1 (Default)
64