Tdn-Invert 3D Input; Tdo-3D Sync Out - Christie Crimson Technical Reference

Commands
Command Description
TDM <mode> Controls when input signals are processed
as 3D or not. (Saved value)
TDN–Invert 3D Input
Inverts the left and right eye frames.
Only applies to: Mirage HD25, Mirage WU25
Commands
Command Description
TDN <0 | 1> Inverts left and right eye frames.
Enabled when the selected signal is a 3D
signal and the 3D mode is enabled.
TDO–3D Sync Out
Configures the 3D Sync OUT port for either an emitter or for another downstream projector.
Only applies to: Mirage HD25, Mirage WU25
Commands
Command Description
TDO? Returns the 3D Sync Out value on main
video. (Read-only)
TDO <0 | 1> Configures the 3D Sync OUT port. (Saved
value)
Crimson and Crimson Mirage Technical Reference–Serial Commands
020-102660-01 Rev. 1 (07-2018)
Copyright 2018 Christie Digital Systems USA, Inc. All rights reserved.
©
Serial API commands
Values
0 = Turns off 3D processing for direct input
signals. Has no effect when a Dual Input 3D
port configuration is selected. Useful for
displaying 2D 120Hz signal. It prevents a
Missing External 3D Synch
event from occurring.
SPC-2145
1 = Automatically determines whether to
enable 3D processing or not. When input
signals are 60Hz or less, no frame doubling
or tripling occurs unless a Dual Input 3D
channel is selected. (Default)
2 = Configures the projector to enable 3D
processing where possible. Frame doubling
occurs when input signals are 60Hz. Frame
tripling occurs when input signals are
48-50Hz.
Values
0 = Leaves the left and right eye frames in
their default order (Default)
1 = Reverses the order of the left and right
eye frames
Values
—
0 = Configures the 3D Sync OUT port to be
fed directly to a 3D emitter, including any
49