Electronics; Removing And Installing The Fuse; Removing The Filter-L Switch - Christie HS 2K Series Service Manual

Electronics

Learn how to replace the electronic components in the projector.

Removing and installing the fuse

To remove and install the fuse, complete the following steps.
1. Turn the projector off.
2. Remove the screw on the fuse with a flat-head screwdriver.
3. Remove the fuse and replace it with a new one.

Removing the filter-L switch

To remove filter-L switch, complete the following steps.
1. Remove the top cover.
See Removing the top cover
2. Remove the main board's top shielding.
HS Series 2K Service Manual—D13HD2-HS, D13WU2-HS, D16HD-HS, D16WU-HS, D20HD-HS, D20WU-HS
020-001468-02 Rev. 1 (01-2020)
Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.
on page 59.
72