Performing A Factory Reset; Test Inspection - Christie HS 2K Series Service Manual

4. Select Service and press Enter.
5. On the IR remote keypad, press 4, 7, 5, 3 buttons sequentially.
Alternatively, on the keypad, press the left, down, right, input buttons sequentially.
6. Select OK and press Enter.

Performing a factory reset

Erase all end-user settings and restore the default on-screen display setting.
1. Enter Service mode.
See Entering Service mode
2. Select Factory Reset.

Test inspection

Complete the required update according to the table below for part replacements indicated by X.
Update Parts replaced
Main
board
Firmware x
version update
Color wheel x
index
Phosphor wheel x
index
Factory reset x
Light sensor
calibration
ROD adjustment
Focus
adjustment
Lens calibration x
ADC calibration x
Network test
HDBaseT
function test
HS Series 2K Service Manual—D13HD2-HS, D13WU2-HS, D16HD-HS, D16WU-HS, D20HD-HS, D20WU-HS
020-001468-02 Rev. 1 (01-2020)
Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.
on page 19.
I/O Lan Color
board board wheel
x
x
x
x x
x
Firmware DMD DMD
board
x
x
x
x
x x
x
Service setups
Light Combiner
engine
x
x x
x
x
x
20