Troubleshooting; Led Status Indicators; Status Led - Christie HS 2K Series Service Manual

Troubleshooting

Use this section for troubleshooting process.

LED status indicators

LED status indicator helps identify the projector state. LEDs are defined below.

Status LED

Identify the LED state colors and meaning.
LED status
Off
Green (flashing)
Green (solid)
Blue (flashing)
Blue (solid)
Yellow (flashing)
Yellow (solid)
Red (flashing)
Red (solid)
White (flashing)
HS Series 2K Service Manual—D13HD2-HS, D13WU2-HS, D16HD-HS, D16WU-HS, D20HD-HS, D20WU-HS
020-001468-02 Rev. 1 (01-2020)
Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.
Projector state
AC power is off (without AC plugged in).
Projector is starting up.
System is operating normally.
Projector is cooling down.
Projector is in standby mode.
A problem exists with the projector that does not cause it to shut down.
Examples of warnings include: filter needs changing, one of the pumps is damaged,
or a fan is operating at full speed due to over temperature of laser diode (LD) driver.
The end user is turning off the projector while it is in a warning state.
An error with the projector exists causing it to shut down.
Examples of errors include: fan failure, over temperature, wrongly installed filter,
color wheel (CW) failure.
The end user is turning off the projector while it is in an error state.
Projector is in a flash (LAN) update state.
41