ID
Check item
2
Factory default
3
Display size
4
Display data channel
5
Acoustic
Check external appearance
Check the projector's external appearance.
ID
Check item
1
Labels
2
Exterior surfaces and covers
3
Logo
4
Screws
5
Safety or warning labels
6
Connectors
HS Series 2K Service Manual—D13HD2-HS, D13WU2-HS, D16HD-HS, D16WU-HS, D20HD-HS, D20WU-HS
020-001468-02 Rev. 1 (01-2020)
Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.
Check point
The factory settings (with appropriate centering, size, geometry distortion, and
so on.) are displayed when Factory Reset is selected from the on-screen
display.
All preset modes shall expand to full screen size using the on-screen display
Horizontal and Vertical Size controls.
The purpose of the DDC test is to verify the (DDC), DDC1/DDC2B operation of
the projector and to verify Plug & Play function.
High pitch sounds from cooling fans and color wheel are unacceptable.
Check point
Missing letters and blurry print are unacceptable.
Dirt, scrapes, and uneven color are unacceptable.
Missing logo, missing letters and blurry print are not acceptable.
All screws must be properly installed and of the right type.
All safety and warning labels must be visible.
All interface connectors must be installed and functional.
Service setups
38