Main Procedure - Christie HS 2K Series Service Manual

Main procedure

Connect power cord,
analog or digital signal,
and then turn on the
Press the power button
to turn on the projector
Do the lasers ignite?
Is the correct PIN code ?
Is the image quality
Is the IR remote keypad
Is the network connection
HS Series 2K Service Manual—D13HD2-HS, D13WU2-HS, D16HD-HS, D16WU-HS, D20HD-HS, D20WU-HS
020-001468-02 Rev. 1 (01-2020)
Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.
Start
projector
Is the power button
backlit?
Yes
Yes
Yes
good?
Yes
working?
Yes
functioning?
Yes
No fault found
End
Refer to verify
No
power connection.
Refer to verify
No
power functionality
Refer to verify PIN
Refer to verify PIN
No
protection section protection section
Refer to verify
No
image performance
Refer to verify the
IR remote keypad
No
operation
Refer to verify the
No
network connection
Troubleshooting
44