Replacing Fan 8 - Christie HS 2K Series Service Manual

4. Disassemble the shielding cover.
5. Separate the fan and fan rubber.
6. Replace the fan 7.
7. To re-install the fan modules, follow these steps in reverse order.

Replacing fan 8

The fan 8 provides air cooling for power supply module.
1. Remove the top cover.
See Removing the top cover
2. Remove the main board module.
See Replacing the main board
3. Remove the main board bottom shielding.
See Removing the rear cover
4. Remove the rear cover.
See Removing the rear cover
5. Remove the front cover.
See Removing the front cover
6. Remove the left side cover.
See Removing the left-side cover
7. Disassemble the shielding cover on the left of the power supply.
See Replacing the DC 12V power supply
HS Series 2K Service Manual—D13HD2-HS, D13WU2-HS, D16HD-HS, D16WU-HS, D20HD-HS, D20WU-HS
020-001468-02 Rev. 1 (01-2020)
Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.
on page 59.
on page 94.
on page 59.
on page 59.
on page 61.
on page 63.
on page 74.
Ventilation and cooling
70