Information On The Power Supply/Battery Charging - Otto Bock 1B1-2 Meridium Instructions For Use Manual

Hide thumbs Also See for 1B1-2 Meridium:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 43
The product was developed for everyday use and must not be used for unusual activities.
These unusual activities include, for example, sports with excessive impact load (tennis, bas­
ketball, running, ...) or extreme sports (free climbing, paragliding, etc.).
Careful handling of the product and its components not only increases their service life but,
above all, ensures your personal safety!
If the product and its components have been subjected to extreme loads (e.g. due to a fall,
etc.), then the product must be inspected for damage immediately by a prosthetist. If neces­
sary, the prosthetist will forward the product to an authorised Ottobock Service Centre.
CAUTION
Signs of wear on system components
Falling due to damage or malfunction of the product.
In the interest of the user's own safety and in order to maintain the operational reliability and
the validity of the warranty, the specified service intervals must be observed.
NOTICE
Improper product care
Damage to the product due to the use of incorrect cleaning agents.
Only clean the product with a damp cloth and mild soap (e.g. 453H10=1 Ottobock Der­
maClean).
NOTICE
Mechanical damage to the product
Change in or loss of functionality due to damage.
Use caution when working with the product.
If the product is damaged, check it for proper function and readiness for use.
In case of changes in or loss of functionality, do not continue using the product (see "Signs
of changes in or loss of functionality during use" in this section).
Take any necessary measures (e.g. repair, replacement, inspection by the manufacturer's
customer service, etc.).
INFORMATION
When exoprosthetic components are used, the use of control functions which are performed
hydraulically or movement of the component in the footshell can cause noise. This kind of noise
is normal and unavoidable. It generally does not cause any problems. If movement noise
increases noticeably during the lifecycle of the component, the component should be immedi­
ately inspected by authorised qualified Ottobock personnel.
Signs of changes in or loss of functionality during use
Decreased forefoot resistance or changes in roll-over behaviour are noticeable indications of loss
of functionality.

4.4 Information on the Power Supply/Battery Charging

CAUTION
Charging the prosthesis without taking it off
>
Falling due to walking and getting caught on a connected battery charger.
>
Falling due to unexpected behaviour of the prosthesis because of changed damping beha­
viour.
For safety reasons, remove the prosthesis prior to charging it.
50

Advertisement

Table of Contents
loading

Table of Contents