Xe1, Xe2 Protective Conductor Connections For Motor And Mains - Rexroth Indramat ECODRIVE03 Series Project Planning Manual

ECODRIVE03 Drive Controllers

XE1, XE2 Protective conductor connections for motor and mains

Illustration:
Tightening torque:
Connection cross section:
ECODRIVE03 DKC**.040, DKC**.100, DKC**.200
Technical description of connector
See page 4-40: "A look at the drive controller and connector
designations".
Design:
Type
screw-in connection
Fig. 4-155: Design
min. tightening torque
Fig. 4-156: Tightening torque
Cross section
single wire
[mm ²]
- -
Fig. 4-157: Connection cross section
XE1, Protective conductor connection for motor
See page 4-64: "Motor connection".
XE2, Protective conductor connection for mains
Note: PE connection > 10 mm ²
Reason:
section: 5.3.2.1)
customerservice@hyperdynesystems.com
No. of pins
1
[Nm]
2 5 .
Max. connectable
cross section
in mm ²
2 5
high leakage
Design
screw-in connection for
ring terminals M5
max. tightening torque
[Nm]
3 0 .
Max. cross section
in AWG
gauge no.:
- -
currents (EN 50178/1998,
| (479) 422-0390
4-95