Rexroth Indramat ECODRIVE03 Series Project Planning Manual page 98

4-66
ECODRIVE03 DKC**.040, DKC**.100, DKC**.200
Single-phase mains connection:
Three-phase mains connection:
customerservice@hyperdynesystems.com
Mains connections
The mains connector serves as the connection of the drive controller with
the power supply.
device-external
Fig. 4-96: Single-phase mains connection
device-external
mains connection
Fig. 4-97: Three-phase mains connection
Note: Mains connections should not be daisy-chained between the
units (intermediate connectors for the supply source should be
used).
See page 11-1: "Mains Connections"
| (479) 422-0390
ECODRIVE03 Drive Controllers
device-internal
X5
L1 L1
N L2
n.c. L3
AP5370F1.FH7
device-internal
X5
L1 L1
L2 L2
L3 L3
AP5303F1.FH7