Rexroth Indramat ECODRIVE03 Series Project Planning Manual page 145

ECODRIVE03 Drive Controllers ECODRIVE03 DKC**.040, DKC**.100, DKC**.200
A B
A B
A B A B
1
Switch connection for the rst and nal slave in the Pro bus-DP
2
The cable shield must be placed bare on the metal guide
Fig. 4-191: Fig. 4-23: Bus link for the rst and last slave without 9-pin D-SUB
socket, INS 0540
A B
A B
A B A B
1
Terminating resistor is o
2
The cable shield must be placed bare on the metal guide
Fig. 4-192: Bus link for all other slaves without 9-pin D-SUB socket, INS 0540
Connect the DKC03.3 to a control unit using a shielded two-wire
conductor in accordance with DIN 19245/ section 1.
customerservice@hyperdynesystems.com
2
2
| (479) 422-0390
4-113
1
on
o
Ap5076f1.fh7
1
on
o
Ap5077f1.fh7