Wire Routing In The Control Cabinet; Emc In The Control Cabinet - Rexroth Indramat ECODRIVE03 Series Project Planning Manual

E C O D R V I E 0 3 D r v i e C o

12.4 Wire routing in the Control Cabinet

12.5 EMC in the Control Cabinet

n r t l o e l s r
• A distance of at least 100 mm between power and control or signal
cables (e.g., feedback cables) must be maintained or
• Separate cable duct with metal divider.
Fig. 12-21: Cable duct variant
Note : Details are speci ed in the project planning manual
"Electromagnetic compatibility (EMC) or AC drives
DOK-GENERL-EMV********-PRxx.
Note : Details are speci ed in the project planning manual
"Electromagnetic Compatibility (EMC) in Drive and Control
Systems ", doc. type DOK-GENERL-EMV********-PRxx.
customerservice@hyperdynesystems.com
C o n t s u r t c n i g
Metal cable duct
Plastic cable duct
>100 mm
|
12-17
h t e C o n r t l o C a b n i t e
2...4 mm
MB5008F1.FH7
", doc. Type
(479) 422-0390