Rexroth Indramat ECODRIVE03 Series Project Planning Manual page 233

ECODRIVE03 Drive Controllers ECODRIVE03 Auxiliary Capacitance Module CZM01.3
K1
3
Fig. 7-13: Connection of auxiliary capacitance module CZM01.3
CAUTION
If the DC bus rails supplied do not make a connection possible, then use
Wire
short twisted wires to do so.
DC bus:
wire length:
wire cross section:
wire protection
voltage resistance of individual wires to
ground
customerservice@hyperdynesystems.com
DKC**.3
-040
-100
-200
3
Damage possible if DC bus connections L+ and
L- are reversed!
Make sure polarity is correct.
CZM1.3
Ap5137f1.fh7
max. 2 x 1 m
min. 10 mm ²,
not smaller than the cross
section of the mains supply
with a fuse in the mains
connections
(e.g., litz wires - H07)
| (479) 422-0390
7-7
lead
> 750V