Control Cabinet Construction With Recommendations For Emc And Cooling - Rexroth Indramat ECODRIVE03 Series Project Planning Manual

E C O D R V I E 0 3 r D v i e C o
16.3 Control Cabinet Construction with Recommendations for
EMC and Cooling
NFD
min. 200
min. 400
Power supply line
PE power supply min. 10 mm 2
Ground clip for shielded motor power cable connected over large surface l
Strain relief for motor power and feedback cables
n r t l o e l s r
DC
AC
1)
Motor power cable
Fig. 16-14: Recommendations on constructing the control cabinet
1) PE rails linked over a large surface with the bare metal of the
mounting panel.
2) Given a distance less than 500 mm between the point of clamping of
the motor cable and the PE rail, the motor cable does not have to run
through the cable channel on the mounting panel.
customerservice@hyperdynesystems.com
5
A - A
min.100
Feedback cable
| (479) 422-0390
16-7
A t t c a h m e t n
Relay
Series terminal
Control lead
(supply lead)
Mains contctors
Automatic fuse
or similar
air evacuation
duct 4)
min. required space:
520 mm for DKC040A
590 mm for DKC100A
Cable channel
power supply
Feedback
cable channel
PE rail 5)
Strain relief
rail
Control lead to
PLC, CNC etc.
min. 100
EB0005F1.FH7