Rexroth Indramat ECODRIVE03 Series Project Planning Manual page 54

4-22
ECODRIVE03 DKC**.040, DKC**.100, DKC**.200
customerservice@hyperdynesystems.com
Arranging the Single source supply
Note: DC bus connection of drive controllers that are connected to
the mains via separate contactors is not allowed!
DKC**.3
-016
-040
-100
-200
K1
3 3
Kn
3
3
Fig. 4-22: Single source supply
Note: In addition to the illustrated connections of the BZM01.3 at the
DC bus, the following connections must be wired as well:
• Bb contact
• control voltage supply
| (479) 422-0390
ECODRIVE03 Drive Controllers
DKC**.3 CZM1.3
3
BZM1.3
3
Ap5109f1.fh7