Rexroth Indramat ECODRIVE03 Series Project Planning Manual page 284

15-2
Replacing or Exchanging Drive Components
2)
1. Pre- formed cables made by INDRAMAT (with connector) are identi ed with a
model label. The label provides the ordering information (IKS 103 for the Feedback
cable, for instance).
2. If cables are ordered without the connector, refer to the stamp on the cable
sheathing (Engine Feedback Cable IN 488, for instance).
customerservice@hyperdynesystems.com
H1
S1
S3 S2
0 0
2)
_ _ _ _ _ _ _ - _ _ _ - _ _ _ _ _ _ / _ _ _ _
Hardware-
H1
serialnumber S1
S3 S2
0 0
FWA-ECODR3 _-_ _ _-_ _VRS-MS
Fig. 15-1: Type designations of the drive components
ECODRIVE03 Drive Controllers
Speci cations for model label
DKC _._ - _ _ _ _ - _
S.No .: _ _ _ _ _ _
Pre- formed engine performance cable
INDRAMAT - cable
IKS _ _ _
No.:
1)
length: m
Pre- formed engine feedback cable
INDRAMAT - cable
IKG _ _ _
No.:
1)
length: m
Software-
serialnumber
| (479) 422-0390
AP5143F1.fh7