Rexroth Indramat ECODRIVE03 Series Project Planning Manual page 332

17-6
n I d x e
customerservice@hyperdynesystems.com
View X5, X6, XE1, XE2 and XS1 with cable shield connection on DKC**.3-100-7 16-23
Mains Connections (DKC**.3-016) 5-32
Mains Contactor 11-7
Mains supply options 4-19
Mains supply options (DKC**.3-016) 5-10
Mass 4-15
BZM01.3 6-2
CZM01.3 7-3
DKC 4-15
Mass (DKC**.3-016 5-2
Materials 4-15
Materials (DKC**.3-016) 5-2
Materials used 4-15, 7-3
BZM01.3 6-2
Measuring devices 16-27
Measuring Systems Connections 4-80
Module widths 12-11
Motor
Replacing 15-4
Motor connection 1-4, 4-64
BZM 6-18
Motor connection (DKC**.3-016) 5-33
Motor Connections (DKC**.3-016) 5-32
Motor holding brake 4-71
Motor holding brake (DKC**.3-016) 5-40
Motor power cables 4-64
Motor power cables (DKC**.3-016) 5-33
Motor temperature monitoring 4-67
Motor temperature monitoring (DKC**.3-016) 5-36
Motor temperature monitoring (TM+, TM) 4-68
Motor temperature monitoring (TM+, TM) (DKC**.3-016) 5-37
Mounting Accessories 13-4
mounting plate 12-6
Mounting Position 12-6
Mounting the cooling unit onto top 16-9
Multiple Row Construction of the Control Cabinet 12-12
N
Number of ECODRIVE03 Units and Auxiliary Components on one DC bus 4-20
O
Optional Choke Connection for DKC**.3-200-7 4-93
Ordering 13-4
Output current characteristic curves for servo applications ( acceleration times
< 400 ms) 4-16
Output current characteristic curves for servo applications ( acceleration times
< 400 ms) (DKC**.3-016) 5-8
Overvoltage 11-1
P
Packaging 13-1
Papers 13-2
Parallel interface 4-98
Parallel Interface 4-97
Parallel Interface 2 4-121
Parameter Module
Replacing 15-7
PE connection 4-95, 6-20
CZM 7-8
PE connection (DKC**.3-016) 5-42
Position of switch 4-105
Positioning block mode 4-101
Power connection
View with contact protection DKC**.3-040-7 16-20
View with contact protection DKC**.3-200-7 16-24
Power dissipation 12-1
Power-dependent arrangement 12-13
| (479) 422-0390
E C O D R V I E 0 3 r D v i e C o n r t l o e l s r