Unit Types Available; Replacement Parts; Additional Accessories; Mounting Accessories - Rexroth Indramat ECODRIVE03 Series Project Planning Manual

13-4
S a t e t f o D e v i l e y r
13.4 Ordering

Unit Types Available

Replacement Parts

Additional Accessories

Mounting Accessories

Commissioning Aids

customerservice@hyperdynesystems.com
f o h t e D r v i e C o m p o n e n
DKC01.3-016-7
DKC02.3-016-7
DKC03.3-016-7
DKC04.3-016-7
DKC05.3-016-7
DKC06.3-016-7
-
DKC21.3-016-7
Note : List of available types is constantly being expanded, please
request current status from a sales o ce of Rexroth Indramat
GmbH.
• Contact protection
• Connecting and mounting accessories SUP-M**-DKC**.3-040
• Connecting and mounting accessories SUP-M**-DKC**.3-040
• Connecting and mounting accessories SUP-M**-DKC**.3-100
• Connecting and mounting accessories SUP-M**-DKC**.3-200
• Connecting and mounting accessories SUP-E01-DKC**.3
• Connecting and mounting accessories SUP-E02-DKC**.3
• Firmware module ESM 2.* (not for DKC**.3-016-7-FW)
• Standard interface cables IKB0005/length four di erent lengths for
RS232 (2 m, 5 m, 10 m or 15 m)
• Interface cable RS485 INK0572/ length (not for DKC**.3-016-7-FW)
A Torx screw driver TX30 with a 400 mm long blade is available.
• Torx screw driver TX30 M6 400 lg (MN00282391)
• Command value box (not for DKC**.3-016-7-FW)
• DriveTop (Software for start-up)
s t
DKC01.3-040-7 DKC01.3-100-7
DKC02.3-040-7 DKC02.3-100-7
DKC03.3-040-7 DKC03.3-100-7
DKC04.3-040-7 DKC04.3-100-7
DKC05.3-040-7 DKC05.3-100-7
DKC06.3-040-7 DKC06.3-100-7
DKC11.3-040-7 DKC11.3-100-7
DKC21.3-040-7 DKC21.3-100-7
| (479) 422-0390
E C O D R V I E 0 3 D r v i e C o
DKC01.3-200-7
DKC02.3-200-7
DKC03.3-200-7
DKC04.3-200-7
DKC05.3-200-7
DKC06.3-200-7
DKC11.3-200-7
DKC21.3-200-7
n r t l o e l s r