NEC iPasolink 200 Manual page 98

6-10
(e) Set the torque spanner.
Notes
Tools
NWD-107460-02E
Submission Prohibited
NEC Internal Use Only
Tightening only of clamp nut by torque spanner.
Tightening the connection to the torque value of 9 to 11 N·m.
14mm
9-11 N·m
1 When inserting, do not put the chip which is braided wire inside the
central conductor and the connector body.
2 Do not turn connector body, turn clamp nut attachment.
• spanner (14 mm)
• torque spanner (14 mm)
• clearance gauge, measure
Holding only
14mm
CABLE TERMINATION
Installation