CABLE TERMINATION
3
Remove 4 mm of insulation from the end of the wire,
4
Insert the cable into the socket contact,
5
The cable should be fitted so that insulation and bare wire are arranged as shown,
6
Insert the socket contact into the hand crimping tool,
CONFORMING WIRE SOCKET CONTRACT
AWG#20-24: TC-CD-111
AWG#24-28: TC-CD-121
Installation
Submission Prohibited
NEC Internal Use Only
CONFORMING WIRE SOCKET CONTRACT
AWG#20-24: CD-PC-111
AWG#24-28: CD-PC-121
Wire
Wire
Hand crimping tool
(HRS TC-CD-111/TC-CD-121)
4 mm
Socket contact
6-47
NWD-107460-02E