5-38
Change of Polarization of TX SPAN ATT
Note
1
If you change to H polarization, loosen two screws, rotate the antenna connection
unit and put the TX ATT horizontally,
2
Check that aperture of the connection unit is rotated as shown below, then fix it
with the two screws that were loosened in step 1.
Cross-recessed
Head machine screw
M2.6 (2ea)
32/38 GHz Band TX SPAN ATT Polarization Change
NWD-107460-02E
Submission Prohibited
NEC Internal Use Only
The TX ATT is set to V-polarization when shipped from the factory.
V Polarization
Plate-2
V Polarization
Guide pin
TX ATT
Antenna
connection unit
Plate-1
H Polarization
ODU MOUNTING
Installation