NEC iPasolink 200 Manual page 142

7-2
Straight Type
ODU
L-Angle type
ODU
IF cable
L Angle type
ODU
IF cable
NWD-107460-02E
Submission Prohibited
NEC Internal Use Only
Caution
When connecting the IF cable to the ODU,
tighten the N-male connector with engage
connector nut only using fingers and
holding the cable with another hand.
IF cable
Tighten the engage connector nut only for
the L-angle connector also.
(Tightening Torque: 0.7 to 1.2 N
(7 to 12 kg
If rotate other parts of the L-angle
connector as illustrated left, it can cause
connector damage.
WIRING and FORMING
cm))
•
m
•
Installation