NEC iPasolink 200 Manual page 113

CABLE TERMINATION
(3) Remove all insulator/tape residue from the center conductor.
Note: Do not damage the center conductor.
Tools
3 Insertion of parts
Install parts B and parts A revolving as onto cable without damaging the braided
wire.
4 The braided wires processing-2
(1) The braided wire should be straight and equally spaced by tweezers.
Installation
Submission Prohibited
NEC Internal Use Only
• cutter
• measure etc.,
Make the braided wire small and sharp at the front;
6-25
NWD-107460-02E