Insertion Of Parts - NEC iPasolink 200 Manual

6-12
Note
Tools
3

Insertion of parts

Install parts B and parts A revolving as onto cable without damaging the braided
wire.
4 The braided wires processing-2
(1) The braided wire should be straight and equally spaced by tweezers.
(2) Fold the braided wire around parts A.
NWD-107460-02E
Submission Prohibited
NEC Internal Use Only
Do not damage the center conductor.
• cutter
• measure etc.,
Make the braided wire small and sharp at the front;
CABLE TERMINATION
Installation