NEC iPasolink 200 Manual page 143

WIRING and FORMING
Straight Type
IDU
L-Angle Type (*)
IDU
IF cable
L Angle Type (*)
IDU
IF cable
Installation
Submission Prohibited
NEC Internal Use Only
Caution
Tighten the TNC-male connector of IF
cable to the IDU with engage connector
nut only using fingers and holding the
cable with another hand.
IF cable
Tighten the engage connector nut only for
the L-angle connector also.
(Tightening Torque: 0.3 to 0.5 N
(3 to 5 kg
If rotate other parts of the
L-angle connector as illustrated left, it
can cause connector damaged.
(*) When using L-angle connector, pay
attention the following precaution to avoid
the connector damaged.
cm))
•
7-3
m
•
NWD-107460-02E