NEC iPasolink 200 Manual page 74

5-52
Note
4 Mount the ODU on to the Bracket and tighten four bolts (M6) at upper and lower
parts of the ODU. Please equip the terminal area of ODU and Adapter with O-
ring, and join together after that,
Adapter
Adapter
O-ring (for ODU)
5 When the attachment screw of the ODU is hard, please loosen the fixed four
screw of adapter once,
Adapter
Bracket
6 Please adjust the position of adapter to compensate for attachment of ODU. Then
tighten four bolts (M6) of the ODU,
NWD-107460-02E
Submission Prohibited
NEC Internal Use Only
Since a bolt projects from a Holder when a pole diameter is small, please
attach the Cap to a bolt end.
Attachment of the ODU
Hexagon Socket Head Screw M6
Note Tightening torque is
4 N·m ±10%.
ODU
Top view
Loosen the fixed four screws
Right angle side
ODU MOUNTING
Installation