Assembly Of The Bracket; Installation To The Pole - NEC iPasolink 200 Manual

ODU MOUNTING
2 Fix the two Holder-1 to the Bracket at four bolts,

Assembly of the Bracket

3 Mount the Bracket to the pole, point to the opposite station and tighten it with
four Stud bolts,

Installation to the Pole

Flat washer M8 (4 ea)
Hexagon nut M8 (8 ea)
Holder-2 (2 ea)
Note Tightening torque is
11 N·m ±10%.
Note
Installation
Submission Prohibited
NEC Internal Use Only
Pole (φ 48.5 to 114.3 mm)
A = B
Since a bolt projects from a Holder when a pole diameter is small, please
attach the Cap to a bolt end.
Holder-1 Assembly
Bracket
Flat washer M6 (4 ea)
Spring lock washer M6 (4 ea)
Hexagon socket head screw M6×16 (4 ea)
Note Tightening torque is
4 N·m ±10%.
A
Holder
B
Bolt end
Cap (4 ea)
5-47
NWD-107460-02E