Demounting From Hybrid/Coupler - NEC iPasolink 200 Manual

5-22

Demounting from Hybrid/Coupler

1 Loosen the four (or six) bolts fixed the ODU,
2 Then demount the ODU.
Note
Note
NWD-107460-02E
Submission Prohibited
NEC Internal Use Only
When demounting the ODU from Hybrid/Coupler, mount the attached
SHORT PLATE to the demounted port of the Hybrid/Coupler to avoid RF
power leaking from the hybrid/coupler and for waterproofing.
Tightening torque is 3.0 N·m ±10%.
Short plate
Mounting hole for
Short plate
Mounting Short plate to the
ODU port
ODU MOUNTING
Installation