NEC iPasolink 200 Manual page 106

6-18
4 Center conductor processing.
(1) Remove of the center conductor as shown.
(2) Chamfer the center conductor.
Tools
Note
5 Connector assembly
(1) The cable center conductor must be straight and aligned with the connector
NWD-107460-02E
Submission Prohibited
NEC Internal Use Only
Center conductor
• nipper
• file, etc.
Do not damage the center conductor.(burr, etc.)
inner contact. Insert the cable into the connector body until stopped; the center
conductor must be inserted into the connector inner contact fingers.
Connector body
1 mm
Center conductor
5 mm ± 1
CABLE TERMINATION
Installation