Table of Contents
Advertisement
5 Care and maintenance
5.4 Sterilization instructions
274
3 min
A
B
E
16
NOTICE
Use only disinfectants that comply with the requirements of your
national authorities and whose bactericidal, fungicidal and virucidal
properties have been tested and properly certified.
Sirona recommends using MinuteWipes from Alpro. In the US:
™
Caviwipes
Observe the instructions of the disinfectant manufacturers.
✔
Wipe disinfection
The disinfectants that are approved in your country must have proven
bactericidal, fungicidal and virucidal properties.
➢ Disinfect by wiping the parts down according to manufacturer
documentation.
Disinfectants to be used
Please observe the manufacturer's instructions for using instrument
disinfectants.
5.4
Sterilization instructions
1. Clean and disinfect the components.
Sterilization instructions
2. Sterilize the light guides (A/B) in the autoclave with saturated steam
at 134 °C (274 °F) and 3 min. holding time (2.04 bar; 29.59 psi
overpressure). NOTICE! Never sterilize the battery (D), attachable
D
filter (E) or the base body (C).
DAC PROFESSIONAL FACE
Steam sterilizers are permitted, but must correspond either to EN 13060
class B (for example, DAC PROFESSIONAL) or to EN 13060 class S and
in addition, must be suitable for the sterilization of dental instruments and
products.
C
NOTICE
Sterilize the light guides in a packing material suitable for sterilization
and storage so as to prevent scratching or chipping the light guides in
the autoclave.
Do not exceed a temperature of 140 °C (284 °F) during the drying cycle.
Do not abort the drying cycle before it has ended.
Do not try to accelerate the cool-down process by placing the light
guides in cold water. This could cause the light guides to crack.
CAUTION
Store all components so that they are protected against contamination.
Sterilize again once the storage period has elapsed.
.
Sirona Dental Systems GmbH
Operating Instructions SIROInspect
63 82 936 D3584
D3584.201.01.03.02 02.2013
Advertisement
Table of Contents
