Valcom V-AW12A Installation Manual page 69

Frequently Asked Questions
• If the clock is battery-powered and in Economy mode, it will attempt to acquire the time signal once
every four hours.
Whether or not a clock actually receives a signal is dependent on the settings of the signal source. For
instance, a receiver on a locally-powered clock that uses a battery-powered clock on economy mode as a
signal source will only receive time data when the signal source transmits it—once every four hours—even
though the receiver listens for a signal once every minute.
When I power my clock, it seems to be running a test instead of showing the time. What is
it doing?
Immediately after power up a Valcom Wireless Clock will run Diagnostic #4 followed by Diagnostic #2.
After both tests are complete, it will show the time.
Can I manually set the time on the wireless clock?
No. Furthermore, attempting open the front crystal or moving the hands manually will damage the clock
and void the warranty.
Valcom, Inc.
5614 Hollins Road
Roanoke, VA 24019
USA
P. 540-563-2000
F. 540-362-9800
www.valcom.com
69