Mounting Piece; 6-19X7/16 Screw; Strain Relief - Valcom V-AW12A Installation Manual

Flag Mount Installation - V-AW12B / V-AW16B
Included in Mounting Kit (A-SLM-MK-S-1)
Description

Mounting Piece

#6-19x7/16 screw

Strain relief

Included in Wiring Kit (A-WK-MTG-1)
#10x1.5 Self-tapping screw
Wall anchor
Included in Gang Box Kit (A-GB-MK-1)
#6-32x1 screw
#6-19x3/8 screw
PLEASE NOTE: A user must also provide a Phillips-head screwdriver, a small flat-blade screwdriver, a drill with a 1/4 inch drill bit, a pencil, a double gang
box, four wall anchors (must support 50 lbs, #8 screw size, 1.5"(3.8cm) screw length), four #8 screws for the wall anchors, two additional #6-32x1 screws
for attaching the mounting plate to the gang box, any equipment needed to install the gang box, and any additional wiring needed to extend the power or
ground cables.
If any of the items listed in the wiring kit are missing, you may contact Valcom and order a
replacement kit.
Quantity
1
(not used)
2
1
2
2
2
(not used)
1
(not used)
Valcom, Inc.
5614 Hollins Road
Roanoke, VA 24019
USA
Picture
P. 540-563-2000
F. 540-362-9800
www.valcom.com
34